I've a leak into the drivers side carpet. I think the problem is the seal which goes around the drivers door window, it's badly perished.(see pics)

Where can I get one of these and how are they fitted?


_KUNENA_BBCODE_HIDEIMG


_KUNENA_BBCODE_HIDEIMG


_KUNENA_BBCODE_HIDEIMG


I've just sealed the window up with tape and will leave it sitting a few days to see if that stops the leak.

I obviously didn't search hard enough before posting....this is what i need... www.ebay.co.uk/itm/Toyota-MR2-MK2-SW20-D...;hash=item460bbb81a8

Are they hard to fit?

Hi I will have a look at the one on my breaker later and if its good I will pop it of and give it to you some day next week. Send me a pic of that bolt that you need fr the seat and I will bring that too.

Sound fair play, I'll get a pic of the bolt later!

Here's a pic of that bolt I need, it's a 12mm socket head for it...don't go looking too hard I'm sure ill pick one up in the hardware shop.

_KUNENA_BBCODE_HIDEIMG

Hi yea I grabed a fist full of bolts yesterday from the foot well think I have a silver bolt a bout that size.

The strip is easy to remove just the four little black plugs two at each end. The rest is stuck with butyl tape not sure where you will get that. If you can't get tape you should be able to get butyl mastic in a silicone type tube in a motor factors. We used it fitting windows in houses in the past the only diffrence between it and silicone is it remains tacky like blue tack for ever you will see what I mean when you are removing your own one.

Here is a link not much info in it but might help

mr2.ie/mr2/bgb/mk2/mechanical/body.html

Sound thanks, there's a plumbing hardware shop up the road I'm sure would have some of that stuff!

Tsporter wrote:
I'm sure ill pick one up in the hardware shop.

Don't do that Tsporter, it will most likely be a different thread type and feck up what you screw it into.