Welcome, Guest
Please Login or Register.    Lost Password?

3SGTE rev2 to rev3 swap
(1 viewing) (1) Guest
Go to bottomPage: 123
TOPIC: 3SGTE rev2 to rev3 swap
#56234
Re: 3SGTE rev2 to rev3 swap 6 Years, 8 Months ago Karma: 72
Eh ok i guess ill put that charcoal canister back too then
spla300
Booooost!!!
Expert Boarder
Posts: 1364
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: longford
Comments? Suggestions? Register above to have your say!
 
#56253
Re: 3SGTE rev2 to rev3 swap 6 Years, 8 Months ago Karma: 72
All them lights lighting up was the alternator broken, I got a different one and started the car, there was 14v coming from it and the lights went out.
It ran smoothly at about 1100rpm when cold but as it warmed up it idled like in that vid I posted and cut out. I tried to start the engine but it just turned over with no signs of life. I let the engine get cold again and it fired up straight away then reached about 72degrees and wouldn't start again.
Could it have anything to do with the fuel pressure regulator and the 650cc injectors? How do I tune them properly?
spla300
Booooost!!!
Expert Boarder
Posts: 1364
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: longford
Comments? Suggestions? Register above to have your say!
 
#56336
Re: 3SGTE rev2 to rev3 swap 6 Years, 8 Months ago Karma: 72
I got the problem sorted big thanks to Sean and Ray.
The problem was the 650cc injectors, i put my stock 550cc ones in and it idled at warm temp without problems.
Anyone know what psi the fuel pressure should be for normal driving at 1bar?
Its about 40psi now, the gauge isnt very accurate its about 1psi off i pulled it off one of them single use a/c gas refill cans.
And why did the pressure go mad there on the second vid??

spla300
Booooost!!!
Expert Boarder
Posts: 1364
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: longford
Last Edit: 2013/03/30 20:39 By spla300.
Comments? Suggestions? Register above to have your say!
 
#56449
Re: 3SGTE rev2 to rev3 swap 6 Years, 8 Months ago Karma: 72
Quick little update, nearly there.
Thanks to MjMitch for the parts to properly mount he chargecooler..

_KUNENA_BBCODE_HIDEIMG

_KUNENA_BBCODE_HIDEIMG

_KUNENA_BBCODE_HIDEIMG
spla300
Booooost!!!
Expert Boarder
Posts: 1364
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: longford
Comments? Suggestions? Register above to have your say!
 
#56575
Re: 3SGTE rev2 to rev3 swap 6 Years, 8 Months ago Karma: 72
Got the mr2 running properly but when it heats up and the idle rpm drops to 850rpm the car starts to smoke and i can smell burning oil but it only starts to smoke the second you hear the rpm dropping when the car warms up. the compression across all cylinders is exactly the same, i was thinking it was seals in the valves or the turbo but i had the turbo on the rev2 engine i took out and there was no smoke so the turbo is fine, and if its the valves it would start to smoke before the engine fully warms up. and the engine pulls strong, the engine was lying up for at least a year outside, would that have anything to do with it? anyone got ideas???
spla300
Booooost!!!
Expert Boarder
Posts: 1364
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: longford
Comments? Suggestions? Register above to have your say!
 
#56576
Re: 3SGTE rev2 to rev3 swap 6 Years, 8 Months ago Karma: 129
Id say it just needs a good drive to clean her out

spla300 wrote:
Got the mr2 running properly but when it heats up and the idle rpm drops to 850rpm the car starts to smoke and i can smell burning oil but it only starts to smoke the second you hear the rpm dropping when the car warms up. the compression across all cylinders is exactly the same, i was thinking it was seals in the valves or the turbo but i had the turbo on the rev2 engine i took out and there was no smoke so the turbo is fine, and if its the valves it would start to smoke before the engine fully warms up. and the engine pulls strong, the engine was lying up for at least a year outside, would that have anything to do with it? anyone got ideas???
Peggyontherun
Expert Boarder
Posts: 928
graphgraph
User Offline Click here to see the profile of this user
Comments? Suggestions? Register above to have your say!
 
#56581
Re: 3SGTE rev2 to rev3 swap 6 Years, 8 Months ago Karma: 59
italian tune up
Bommie
Expert Boarder
Posts: 847
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: Waterford Birthday: 03/24
Comments? Suggestions? Register above to have your say!
 
#56582
Re: 3SGTE rev2 to rev3 swap 6 Years, 8 Months ago Karma: 72
Yeah i may be worrying too early, someone else told me today aswel that it probably needs to be driven.
Yes italian tune up
Ill ring the insurance tomorrow and hopefully have her on the road this weekend
spla300
Booooost!!!
Expert Boarder
Posts: 1364
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: longford
Comments? Suggestions? Register above to have your say!
 
#56618
Re: 3SGTE rev2 to rev3 swap 6 Years, 8 Months ago Karma: 72
Got the rad for the chargecooler mounted and filled up the chargecooler with coolant just need to send a few wires to a switch somewhere on the dash for the fans and coolant pump and thats it with the engine.
Then just have to fiberglass the scoop properly, really not looking forward to it

_KUNENA_BBCODE_HIDEIMG
spla300
Booooost!!!
Expert Boarder
Posts: 1364
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: longford
Comments? Suggestions? Register above to have your say!
 
#56660
Re: 3SGTE rev2 to rev3 swap 6 Years, 8 Months ago Karma: 72
The smoke seems to have stopped
Im only running .7bar/10psi just to be safe for now.
And the people that had their car on a dyno, when the car is connected to a computer does it tell if the car is running rich or lean, and would the lads there adjust fuel pressure and all that or is it just here is your bhp power output the way your car is and goodbye???
Ive just never been at a dyno and dont know if they bother adjusting anything on the car or not...
spla300
Booooost!!!
Expert Boarder
Posts: 1364
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: longford
Comments? Suggestions? Register above to have your say!
 
#56707
Re: 3SGTE rev2 to rev3 swap 6 Years, 8 Months ago Karma: 80
I think you pay to get it up on the dyno but U have to pay extra to get it mapped that's pro rally what it needs
cozzy90
i hate diesel
Addict
Posts: 1623
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: mallow
<img src="imageshack.us/a/img707/4755/7bn2.jpg" alt="Image Hosted by ImageShack.us"/><br/>
Comments? Suggestions? Register above to have your say!
 
#56731
Re: 3SGTE rev2 to rev3 swap 6 Years, 8 Months ago Karma: 72
I rang Martin Tracey there in enfield precision engineering place, had a quick chat with him, couldnt really hear him that well because of bad conection but he said if i book a dyno with him he will be able to tell me what the correct fuel pressure should be but he told me to set it to 3 bar for now.

Anyone else have a sard fuel pressure regulator on here?? if so what fuel pressure you running and what boost, engine mods, etc. please and thanks
spla300
Booooost!!!
Expert Boarder
Posts: 1364
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: longford
Comments? Suggestions? Register above to have your say!
 
#56733
Re: 3SGTE rev2 to rev3 swap 6 Years, 8 Months ago Karma: 88
3 bar ... are you sure he said 3 bar ??
Japohara
F*(k your honda civic
Expert Boarder
Posts: 1136
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: Westmeath Birthday: 03/17
Forgive me for I know not what i do ....
Comments? Suggestions? Register above to have your say!
 
#56734
Re: 3SGTE rev2 to rev3 swap 6 Years, 8 Months ago Karma: 108
spla300 wrote:
I rang Martin Tracey there in enfield precision engineering place, had a quick chat with him, couldnt really hear him that well because of bad conection but he said if i book a dyno with him he will be able to tell me what the correct fuel pressure should be but he told me to set it to 3 bar for now.

Anyone else have a sard fuel pressure regulator on here?? if so what fuel pressure you running and what boost, engine mods, etc. please and thanks


Yes its 3bar but don't forget it drops at idle speed I had mine set on the rollers just to be sure of it
ricky2
Expert Boarder
Posts: 1385
graphgraph
User Offline Click here to see the profile of this user
rickyd96 Location: carrickfergus Birthday: 01/15

_KUNENA_BBCODE_HIDEIMG
Comments? Suggestions? Register above to have your say!
 
#56739
Re: 3SGTE rev2 to rev3 swap 6 Years, 8 Months ago Karma: 72
Yeah you disconnect the vacuum pipe before adjusting it.
I found this on the internet but im not sure what to go with, do i go with the 3sgte setting or the mr2 setting? but i dont know if the mr2 setting is an n/a or turbo...

_KUNENA_BBCODE_HIDEIMG
spla300
Booooost!!!
Expert Boarder
Posts: 1364
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: longford
Comments? Suggestions? Register above to have your say!
 
#58255
Re: 3SGTE rev2 to rev3 swap 6 Years, 6 Months ago Karma: 42
We'll man what's the up date how's the car running now.
got92tubby
Senior Boarder
Posts: 793
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: carlow Birthday: 05/17
Comments? Suggestions? Register above to have your say!
 
#58281
Re: 3SGTE rev2 to rev3 swap 6 Years, 6 Months ago Karma: 72
so far so good, kicking like a mule
Rear right bearing went though, gonna get to it tomorrow. bearing cost me 105euro.
Ill be replacing all the balljoints, droplinks and anything else that needs replacing down there. my nct is up at the end of this month

And she started smoking again, smell of burning oil and blue smoke but no loss of oil...

Anyone have a chassis number for a GT4 ST205 clica? i wanna get some turbo parts since my turbo is from a celica.
spla300
Booooost!!!
Expert Boarder
Posts: 1364
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: longford
Comments? Suggestions? Register above to have your say!
 
#58289
Re: 3SGTE rev2 to rev3 swap 6 Years, 6 Months ago Karma: 42
That's a bitch. Hopefully you get it sorted soon. At least it's running a guy in my estate put an sr20 into his 180 And spent the whole weekend try to start it I mean two full days turning over must have the best starter On the planet.
got92tubby
Senior Boarder
Posts: 793
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: carlow Birthday: 05/17
Comments? Suggestions? Register above to have your say!
 
#58337
Re: 3SGTE rev2 to rev3 swap 6 Years, 6 Months ago Karma: 72
got92tubby wrote:
That's a bitch. Hopefully you get it sorted soon. At least it's running a guy in my estate put an sr20 into his 180 And spent the whole weekend try to start it I mean two full days turning over must have the best starter On the planet.

What was the problem with his car do u know?
spla300
Booooost!!!
Expert Boarder
Posts: 1364
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: longford
Comments? Suggestions? Register above to have your say!
 
#58341
Re: 3SGTE rev2 to rev3 swap 6 Years, 6 Months ago Karma: 42
He wasn't getting a pulse in the wires to the injectors both wires were staying live rather than one switching to neutral. wiring looked a mess don't think it's goin yet.
got92tubby
Senior Boarder
Posts: 793
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: carlow Birthday: 05/17
Comments? Suggestions? Register above to have your say!
 
#59029
Re: 3SGTE rev2 to rev3 swap 6 Years, 5 Months ago Karma: 72
Engine coming out again , changing the gearbox, popping out of 5th gear.

_KUNENA_BBCODE_HIDEIMG
spla300
Booooost!!!
Expert Boarder
Posts: 1364
graphgraph
User Offline Click here to see the profile of this user
Gender: Male Location: longford
Comments? Suggestions? Register above to have your say!
 
Go to topPage: 123